61M2P050A0400 SILINDER SER. 61
Tootekood: 10-4875-4002
Ühik: tk
Laoseis: Tellimisel
Ühik: tk
Laoseis: Tellimisel
Ø | AM | B | BG | E | EE | G | KK | L1 | L2+ | L3 | MM | N | PL | R | RT | SW1 | SW2 | SW3 | SW4 | TG | VA | VD | WH | ZJ+ | front/rear cushion stroke |
50 | 32 | 40 | 16 | 64,5 | G1/4 | 8 | M16x1,5 | 25 | 106 | 5 | 20 | 29,5 | 15 | 16 | M8 | 17 | 8 | 3 | 24 | 46,5 | 4 | 6 | 37 | 143 | 15 / 14 |
Series general data
Type of construction | with tie-rods (inside the profile) |
Operation | double-acting, single-acting, tandem. Low friction version: double-acting only. |
Materials | standard: AL end-blocks and piston, rolled stainless steel AISI 420B rod, anodized AL profile tube, zinc-plated steel tie-rods and tie-rod nuts, PU seals; low friction: standard materials with NBR piston seal and NBR rod seal (FKM rod seal on request) low temperature: standard materials with chrome plated stainless steel AISI 420B rod, brass rod scraper ring, stainless steel AISI 303 nuts, stainless steel AISI 420B tie-rods, PU piston seals and NBR rod seal |
Type of mounting | with front / rear flange, foot mounting, with front / rear / centre / swivel trunnion |
Stroke min - max | 10 ÷ 2500 mm |
Operating temperature | standard and low friction: 0°C ÷ 80°C (with dry air -20°C) low temperature (-40°C version): -40°C ÷ 60°C (with dry air -40°C) low temperature (-50°C version): -50°C ÷ 60°C (with dry air -50°C) |
Operating pressure | 1 ÷ 10 bar (standard and low temperature); 0,1 ÷ 10 bar (low friction) |
Speed | 10 ÷ 1000 mm/sec, no load (standard and low temperature); 5 ÷ 1000 mm/sec, no load (low friction) |
Fluid | filtered air, without lubrication. For standard versions only: if lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. |
Sarnased tooted
Tootekood: 70-1104-0014
, Laoseis: Tellimisel